Model 605 Column Oven

Model 605 Column Oven

Increase the accuracy and consistency of your chromatography with the Model 605 Column Oven. Temperature changes through the day -- and even drafts -- in your laboratory can affect your results. Get precise, repeat results with uniform, controlled temperature.

Uniform Temperature

- All major elements -- columns, injector, precolumns -- are enclosed in the oven chamber.
- Constant temperature is maintained entire length of fluid path.
- Mobile phase is used as transfer medium; temperature is unaffected by flow rate.

Precise

- Temperature is maintained within ±0.2° C

Large Capacity

- Holds up to six analytical or GPC columns
- No need for special blocks or inserts

Model 605 Column Oven Specifications

Operating Range…..10° C above ambient to 100° C.
Recommended Flow Range…..Up to 8 mL/min.
Temperature Accuracy…..±2° C over entire range. The setpoint changes slightly depending on composition and mobile phase flow rate.
Temperature Repeatability…..±1° C
Temperature Stability…..±0.2° C
Thermal Safety Cutoff…..118° C, self-resetting
Stabilizing Time…..30 minutes to 100° C for “ready” at 2 mL/min. For analyses requiring high precision, wait 30 minutes after the READY light illuminates before beginning an analysis.
Average Cooling Time…..30 minutes to 10° C above ambient at 2 mL/min from 100° C (with cover off).
Column Capacity…..Up to three 3/8-in. x 30 cm columns or four 1/4-in. x 30 cm columns
Column Chamber Material…..Anodized, solvent resistant aluminum
Line Voltage…..The power entry module on the rear of the cabinet can be set by the user to
100-120 Vac single-fused or 220-240 Vac double-fused, 50/60 Hz operation.
Power Consumption…..120 watts
Overall Dimensions…..8.75” H x 5” W x 19.5” D (22.2 x 12.7 x 49.5 cm)
Weight…..21 lbs. (9.5 kg)
Remote Inputs…..RS-232, 0 to 10 Vdc set point temperature voltage control.
Remote Outputs…..RS-232, Relay contact closure when oven is ready. The contact is rated at 0.25 amp maximum, 100 Vdc maximum, and 0.2 ohm.