Series I Pump
Downloads
A Versatile and Economical HPLC Pump That Delivers the Best
Performance for Your Investment.
High Performance at a Low Cost
The Series I pump uses new manufacturing techniques and proven fluidics to give the highest performance at the lowest cost.
Wide Flow Range
The Series I operates from 0.01 – 10.00 mL/min. at pressure ratings up to 2500 psi; or from 0.10 – 40.00 mL/min. at up to 650 psi; allowing both analytical and small-scale preparative applications.
Saves Bench Space
The Series I requires only 8 inches by 14-1/2 inches deep of valuable bench space.
Choice of Materials
The choice of Stainless Steel or PEEK fluid paths make the Series I ideal for pumping solutions as diverse as distilled water, organic solvents, or radioactive slurries.
Positive Seal-Washing Standard
The exclusive self-flush head extends seal life dramatically by removing salts and wetting the seal.
Easy Maintenance
The completely disposable head assembly can be changed in seconds at the price similar to seals and check valves in most pumps.
Flexible Advanced Control
The Series I is RS-232C control-compatible and operates with simple commands from any terminal or computer program.
The Best Performance Per Money Spent
The Series I represents a class of HPLC pumps for use in critical metering applications and all isocratic HPLC applications where pressure above 2500 psi is not required.
Standard Features
- Self-flushing Pump Head
- Stainless Steel or PEEK Fluid Path
- Simple Keypad Controls with LED Display (0.1 mL increments)
- Single Piston with Electronic Rapid Refill Mechanism
- Motor Stall Detector
- RS-232 Serial Com Port for Control & Status Monitoring
Series I Pump Specifications - 10 mL
Flow Rate.....0.01 - 10.0 mL/min.
Max. Pressure.....2500 psi
Flow Accuracy.....± 2%
Flow Precision.....0.5% RSD
Remote Control.....RS-232 and Run/Stop
Dimensions.....6.3” H x 7.8” W x 14.2” D (16.0 x 19.8 x 36.1 cm)
Material.....PEEK and Inert Polymers - or - Stainless Steel
Power.....120/230 Vac; 50/60 Hz